Sundance Spas 850 Installation & Owner's Manual page 29

850 export series
Hide thumbs Also See for 850:
Table of Contents

Advertisement

ENGLISH
H. Scan Functions
Select any AM or FM band and press scan button (1 1) to listen to a few
seconds of each radio station. The display will flash and the radio will
automatically scan to the next higher station, play that station for a few
seconds, then scan to the next higher station. To stop scanning and con-
tinue listening to the current station, press scan button a second time.
Note: the radio remains in scan mode until the scan button is pressed a
second time or one of the tune buttons is pressed.
I.
Preset Scan Function
Press the auto button (16) once to enter scan mode. The next higher pre-
set station will be selected and be played for 3 seconds while the preset
number on the display flashes. If you wish to remain on this station, press
the auto button (16) a second time. Note: preset scanning continues
unless you press the auto button (16) or either preset button (P1-P6) to
cancel.
J. Local/Distance Function
Press the local button (10) to toggle between local and distant station
mode. When "LOCAL" is displayed, only the strongest stations will be
selected during seek or scan. Note: in the default mode (no LOCAL dis-
play), all usable stations will be selected during seek or scan.
K. Changing Tuner Frequency from Europe to US
Your unit is factory set to Europe tuning frequency steps. To switch to US
tuning steps, use the switch on the bottom of the unit. With the unit dis-
connected from the power source, use a screwdriver to slide the switch to
the desired position. Note: power must be removed from the radio, or
the reset switch must be pressed before the new frequency mode is
activated.
Optional SunSound
A. Insert, Play, and Eject a CD
Open the front panel and insert a CD into the slot with the CD label facing
up. The CD will be drawn inside by the motorized mechanism. Close the
front panel. The "DISC IN" symbol on the display indicates that a CD is in
the drive.
To play CD: press the source button (4) to change to CD mode. The
CD will play. The display shows the current track and play time, and
will animate a 3-D rotating disc while the CD is playing. Note: if CD
Page 20
TM
Stereo Receiver CD Player Operation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents