Selecting The Desired Massage Action; Adjusting Fluidix Intelli-Jets - Sundance Spas 850 Installation & Owner's Manual

8.6 Selecting The Desired Massage Action

Your Sundance spa is equipped to allow you to customize
the massage action you desire. Each model incorporates
a diverter valve(s) that allow you to customize the mas-
sage and performance by diverting water between various
jet systems. Simply turn diverter to position A (Combo), B, or C to divert
water pressure to various jet groups. Note: The diverter valve is designed to
operate in positions A (Combo), B, and C for optimum performance. It is con-
sidered normal for sound levels within the valve to vary between positions
due to the large amounts of water flowing through it! For optimum filtration
benefits, leave the valve in position A when spa is covered. Select position
B or C for maximum jet performance during spa use.
In the Optima, Cameo and Marin, one massage
selector controls the therapy jets and whirlpool jets.
The other massage selector controls the therapy
seat jets and vertical jets (foot jets).
In the Altamar, the massage selector on the pump #2
system diverts between the therapy seat and the whirlpool
jets (in the footwell and on the side wall). The pump #1
system powers the therapy jets in the lounge and seats of
the hot tub.

8.7 Adjusting Fluidix Intelli-Jets

The Fluidix Intelli-Jets in your new spa offer the
advantage of no moving parts and zero maintenance. They can also be
adjusted for a high and low impact massage, providing the ultimate mas-
sage! Each jet has it's own water volume and directional or oscillating flow
adjustment. The jet's outer dial controls water volume (flow rate) and it's
center "mode disk" selects either an oscillating or directional flow massage.
To Adjust Jets
1. Turn outer dial (A) clockwise to increase water
volume. Turn outer dial counterclockwise to decrease
water volume or to shut jet off.
2. Rotate center "mode disk" (B) clockwise to select a
non-oscillating water stream or turn counterclockwise
to select an oscillating stream at any angle.
3. For a high impact massage, turn corresponding air
control knob clockwise. For low impact massage, turn corresponding air
control knob counterclockwise.
Note: Always keep at least 6 adjustable jets open at all times on each jet
system.
ENGLISH
B
A
Page 15