Simultaneous Ring Personal - Avaya J139 Manual

Advanced features
A multicast page is ignored if the agent is on an active call and has the Do Not Disturb status, or
making an emergency call.
Sending a multicast page
About this task
You can send a multicast page to a group of users by activating the Multicast Paging group on the
Phone screen. If the required group is not added on this screen, you can access all multicast page
groups configured for your phone in the Features menu.
Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
• Press Headset.
2. (Optional) If you use the handset, press End Call to cancel dialing.
3. On the Phone screen, scroll to the required multicast page group, and press Select.
The phone displays the Paging <group name> box.
4. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.

Simultaneous Ring Personal

With the Simultaneous Ring Personal (SRP) feature, you can list up to 10 phone numbers or SIP-
URI addresses you want to receive calls to in addition to your primary phone. This feature may be
used when, for example, you are not at your desk phone and you need to answer a call from your
cell phone. Simultaneous ring can be turned off when you are at your desk on a call.
Important:
If your cell phone has the voice mail which is activated before your office voice messaging, the
voice messages will be recorded in your cell phone database.
Note:
If Simultaneous Ring Personal is activated, the corresponding LED on the phone is green. If
the feature is disabled, the LED is red. Contact your system administrator or go to the
BroadSoft web interface yourself to activate the feature. See
more information.
October 2019 Using Avaya J139 IP Phone in an Open SIP environment
Comments on this document? infodev@avaya.com
https://www.broadsoft.com/ for
70