Download Print this page

Important Safeguards - Sunbeam MIXMASTER 2372 Instruction Manual

Hand/stand mixer
Hide thumbs Also See for MIXMASTER 2372:

Advertisement

Available languages

Available languages

When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions before using the Hand/Stand Mixer.
2. To protect against risk of electrical shock, do not put Hand/Stand Mixer in water or other
liquid. This may cause personal injury or damage to the product.
3. Close supervision is necessary when Hand/Stand Mixer is used by or near children or
incapacitated persons.
4. Unplug from outlet while not in use, before putting on or taking off parts and
before cleaning.
5. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other
utensils away from beaters during operation to reduce the risk of injury to persons and/or
damage to the Hand/Stand Mixer.
6. Do not operate Hand/Stand Mixer with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest
Sunbeam Appliance authorized service center for examination, repair or electrical
or mechanical adjustment.
7. The use of attachments not recommended or sold by Sunbeam may cause fire, electrical
shock or injury.
8. Do not let cord hang over edge of table or counter or touch hot surfaces, including
the stove.
9. Do not use outdoors or for commercial purposes.
10. Remove beaters from Hand/Stand Mixer before washing.
11. Do not place Hand/Stand Mixer on or near a hot burner or in a heated oven.
12. Do not use Hand/Stand Mixer for other than intended use.
13. Do not leave Hand/Stand Mixer unattended while it is operating.
SAVE THESE INSTRUCTIONS
This Unit For Household Use Only
FOR PRODUCTS PURCHASED IN U.S. & CANADA ONLY:
To reduce the risk of elecrical shock, this appliance has a polarized plug (one blade is wider
than the other). As a safety feature, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

IMPORTANT SAFEGUARDS

2

Advertisement

loading