Table of Contents
Advertisement
% &DQ 1RW &RQQHFW 7R 7KH 1HWZRUN
If your PC Card seems to be working fine, but you are not able to connect to
the network, this error might be due to a configuration mismatch.
For example if both LEDs of your PC Card blink once every ten seconds, the
problem is likely to be caused by a configuration mismatch of:
•
Network Name
•
Encryption Key
The SIMATIC NET IWL Network Name is case-sensitive.
% /('V :RUN %XW &DQnW &RQQHFW WR 1HWZRUN
If you can not connect to the network while the LEDs indicate that the
network is working properly (Power LED is on, Radio LED blinks) your
problems might be caused by:
•
Incorrect TCP/IP settings for your wireless network adapter (Changing
TCP/IP Settings).
•
Your Windows operating system requires an update with a Microsoft
Service Pack.
Industrial Ethernet Wireless LAN CP 1515
C79000-G8976-C169-01
/(' $FWLYLW\
61
Advertisement
Table of Contents
