System Data - Siemens Sinamics S120M Equipment Manual

3.5

System Data

Technical data
The following technical data applies to components in the SINAMICS S120 booksize drive
system and SINAMICS S120M distributed drive system.
Table 3-11 Electrical data
Electrical data
Line connection voltage
Line frequency
Electronics power supply
Short-circuit current rating (SCCR) in accordance with
UL 508C
(up to 600 V)
Electromagnetic compatibility
Overvoltage category
Degree of contamination
Table 3-12 Degree of protection and safety class
Degree of protection
● The central components
(SINAMICS S120 Booksize and AM600)
● Distributed components (S120M)
Safety class
● Power circuits
● Electronic circuits
Table 3-13 Environmental conditions
Chemically active substances
● Long-term storage
● Transport
● Operation
Biological environmental conditions
Manual, 06/2019, 6SL3097-5AW00-0BP1
380 to 480 V 3 AC, ±10% (-15% < 1 min)
47 ... 63 Hz
24 V DC -15% / +20% PELV or SELV
65 kA in conjunction with Class J fuses
SCCR in connection with other protection devices, see "Protective
Devices for SINAMICS S120 Line Modules Booksize
support.industry.siemens.com/cs/de/de/view/109749282)".
according to IEC 61800-3: Used in the second environment (indus‐
trial line supplies).
● As standard, Category C3
● With additional components Category C2 is possible
III to EN 61800-5-1
2 acc. to EN 61800-5-1 for S120 and S120M central components
3 acc. to EN 61800-5-1 for S120M distributed components
IP20 or IPXXB acc. to IEC 60529, open type acc. to UL 508
IP65 (IP67 optional on the shaft)
Safety class I (with protective conductor connection)
Protective/safety extra low voltage PELV/SELV (max. 60 VDC)
Class 1C2 according to EN 60721-3-1, in product packaging
Class 2C2 according to EN 60721-3-2, in transport packaging
Class 3C2 according to EN 60721-3-3
System overview
3.5 System Data
(https://
1)
2)
51