Siemens SINUMERIK 840Di sl Function Manual page 116

3 Setting up functions
3.4 Fault services
Fig. 3-24: Timeout trigger
Field
Name
Trigger start
Trigger start name
Trigger start
condition
Trigger stop
Trigger stop name
Trigger stop
condition
Monitoring time
3-116
Content
Name of the trigger: If this is not
entered, the trigger is called Timeout
and assigned a consecutive number in
brackets.
If the logic conditions are fulfilled for
start, monitoring starts for the specified
time
The logic operations are created as
described for the PLC variables.
Displays the name specified in the
PLC variable configuration
Displays the condition specified in the
PLC variable configuration
If the logic conditions are fulfilled for
stop, monitoring stops. Independently,
timeout times are also compared so
that the trigger can be triggered.
The logic operations are created as
described for the PLC variables.
Displays the name specified in the
PLC variable configuration
Displays the condition specified in the
PLC variable configuration
The monitoring time is the threshold
ePS Network Services, Function Manual (FH) - Release 12/2008
Type
DISPLAY
INPUT
(Max. 40 charac-
ters; any charac-
ter permissible)
ACTION
DISPLAY
DISPLAY
ACTION
DISPLAY
DISPLAY
DISPLAY
© Siemens AG 2008 All Rights Reserved
12/2008