4.
Use (E) and (B) to select a language.
[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian
5.
Press (A) to exit the setting screen.
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
3.
Press (D) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
4.
Use (E) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
5.
Press (A) to exit the setting screen.
Note
Note that alarm and timer tones will still
●
sound even while the operation tone is
muted.
Operation Guide 5608
Configuring Power Saving
Function Settings
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
3.
Press (D) 15 times.
This displays [P.SAVE].
4.
Press (E) to toggle the setting between
Home City
enabled (on) and disabled (off).
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
5.
Press (A) to exit the setting screen.
Note
For details about Power Saving, refer
●
to the information below.
Power Saving Function
l
Returning the Watch to Its
Factory Default Settings
This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Stopwatch
●
Timer
●
Alarm
●
Home City
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
3.
Press (D) twice.
This causes the seconds to flash.
4.
Hold down (B) for at least five seconds.
Release the button when [RESET] stops
flashing.
5.
Press (A) to exit the setting screen.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Home City
Seconds
17