Maintaining Your Blender; Customer Service - Sunbeam 6092 User Manual

MAiNTAiNiNg yOur
hOW TO CLEAN ThE BLENdEr
• Unplug the blender from electrical outlet.
• Wipe blender base, control panel, and cord with a damp cloth or sponge. To remove
stubborn spots, use a mild, non-abrasive cleanser.
• To clean jar, unscrew the blade assembly from jar, keeping jar tilted. Lower blade
assembly in the direction of the blade. Tilt up and the other blades will clear the jar
bottom opening.
• Carefully remove gasket from outer rim of blade assembly.
• Carefully wash blade assembly, gasket, jar and cover in warm, soapy water. Rinse
and dry thoroughly. Do not soak. Do not wash blade assembly, gasket, or cover
in a dishwasher.
• Replace gasket onto blade assembly and re-insert blade assembly into glass jar.
Do so by tilting it slightly and entering jar with the blade that curves up. Move as
needed to clear the remaining blades.

CuSTOMEr SErViCE

If you have a question about your blender, call our toll-free customer service number in
the US:1-800-458-8407 and in Canada:1-800-667-8623. Before calling, please note the
model, type, and serial numbers. These numbers can be found on the bottom of your
blender. This information will help us answer your question much more quickly.
5
SPEEd BLENdEr