Kohler PRO 5.4 DES Service Manual page 16

Disassembly/Inspection and Service
PRO 5.4 DES Components
H
A Engine Baffl e
E Isolator Mount
I Retention Container
Remove Muffl er and Muffl er Shield
1. Remove screws securing muffl er to muffl er shield.
2. Loosen muffl er clamp.
3. Remove muffl er.
4. Remove screws securing muffl er shield to engine
baffl e.
5. Remove muffl er shield.
6. Remove screws securing exhaust pipe to engine,
and remove exhaust pipe.
16
G
F
E
B Muffl er Shield
F Exhaust Pipe
J Alternator Mount
KohlerPower.com
A
B
K
C
C Engine Mount
G Muffl er Clamp
K Fuel Hose
Remove Engine and Alternator
At this point engine and alternator can be removed
as a unit to further disassemble or alternator can be
removed from engine for disassembly. To remove
engine and alternator as a unit, follow next few
steps, otherwise continue to Remove Stator.
1. Remove nuts securing engine mounts.
2. Remove nut securing alternator mount.
3. Lift engine and alternator off retention container.
D
J
I
Lower Alternator
D
Baffl e
H Muffl er
38 690 01 Rev. --