Trusted Computing - Supermicro X11SCD-F User Manual

IPSEC Certificate
The feature appears if Network Stack is enabled. Internet Protocol Security (IPSEC) offers
a secure connection for remote computers using a secure tunnel. The options are Disabled
and Enabled.
PXE boot wait time
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.

Trusted Computing


*The features in the Trusted Computing section on this page are displayed if a TPM
1.2 module is detected:
•
Firmware Version
•
Vendor
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Please reboot the system for a change on this setting to take effect. The options
are Disable and Enable.
•
Active PCR Banks
•
Available PCR Banks
*If the feature "Security Device Support" is enabled, the following features are available
for configuration:
SHA-1 PCR Bank
Use this feature to disable or enable the SHA-1 Platform Configuration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
SHA256 PCR Bank
Use this feature to disable or enable the SHA256 Platform Configuration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
81
Chapter 4: BIOS