Super X11SCD-F User's Manual
Power Management
•
Power button override mechanism
•
ACPI power management
•
Management Engine (ME) Server platform service
•
Power-on mode for AC recovery
•
Keyboard wakeup from S5
System Health Monitoring
•
Onboard voltage monitoring for +1.8V, +3.3V, +5V, +12V, +3.3VStdby, +5V Stdby, VBAT, HT, Memory, PCH Temp, System
Temp, Memory Temp
•
6+2 CPU switching phase voltage regulator
•
CPU Thermal Trip support
•
PECI (Platform Environment Control Interface) 2.0 support/TSI
System Management
•
Trusted Platform Module (TPM) support
•
SUM-InBand, SUM-OOB
•
Intelligent Platform Mangement Interface (IPMIView, SMCIPMITOOL, IPMICFG)
•
System resource alert via SuperDoctor® 5
•
Watch Dog, Non-maskable interrupt (NMI)
LED Indicators
•
CPU/System Overheat LED
•
Fan Failed LED
•
UID/remote LED
Dimensions
•
Microcloud single node form factor (15.69" x 4.75") (398.5 mm x 120.65 mm)
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specifications for proper CPU TDP sizing.
Note 2: For IPMI configuration instructions, please refer to the Embedded IPMI Con-
figuration User's Guide available at http://www.supermicro.com/support/manuals/.
Note 3: If you purchase Supermicro Out of Band (OOB) software license key
(Supermicro P/N: SFT-OOB--LIC), please DO NOT change IPMI MAC address. Once
the MAC address changed, the OOB license key will be invalid.
Motherboard Features
14