Super X11SCD-F User's Manual
Serial ATA Port 0 Hot Plug
Set this feature to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and Enabled.
Serial ATA Port 0 Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled and Enabled.
Serial ATA Port 0 SATA Device Type
Use this feature to specify if the SATA port specified by the user should be connected to a
Solid State Drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State
Drive.
Serial ATA Port 1 (JMD1)
This feature displays the information detected on the installed SATA drive on the particular
SATA port on the JMD1 slot.
•
Model number of drive and capacity
•
Software Preserve Support
Serial ATA Port 1 Hot Plug
Set this feature to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and Enabled.
Serial ATA Port 1 Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled and Enabled.
Serial ATA Port 1 SATA Device Type
Use this feature to specify if the SATA port specified by the user should be connected to a
Solid State Drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State
Drive.
Serial ATA Port 2 (SATA disk2)
This feature displays the information detected on the installed SATA drive on the particular
SATA port on the backplane.
•
Model number of drive and capacity
•
Software Preserve Support
76