Installing The Motherboard Into The Mounting Tray - Supermicro X11SCD-F User Manual

Installing the Motherboard into the Mounting Tray

1. Locate the mounting holes on the motherboard and the mounting tray. See the previous
page for the location.
2. Install the standoffs on the mounting tray. Align the mounting holes on the motherboard
against the mounting holes on the tray.
3. Using a Phillips screwdriver, insert and tighten Phillips head #6 screws into the mounting
holes on the motherboard and their matching holes on the tray.
Note: Images displayed in this manual are for illustration only. Your chassis or
components may look different from those shown.
21
Chapter 2: Installation