Memory Functions - Mercedes-Benz G-Class Owner's Manual

Memory functions

102
Calling up a stored parking position set-
ting
Left-hand exterior mirror
:
Right-hand exterior mirror
;
Adjustment button
=
Memory button
?
X
Turn the key to position 2(
the ignition lock.
X
Adjust the exterior mirror on the front-
passenger side using button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of
R
15 km/h
if you press button : for the exterior mir-
R
ror on the driver's side
Memory functions
Storing settings
G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic con-
ditions by the steering wheel and seat moving
of their own accord, and as a result, cause an
accident.
G
The memory function can still be used when
the key has been removed. For this reason,
children should never be left unsupervised in
the vehicle. They could otherwise become
trapped when adjusting the seat or the steer-
ing wheel.
Y page 143) in
X
X
X
X
X
Calling up a stored setting
!
X
i
WARNING
Make sure that the key is in position
2( Y page 143) or that the respective door
is open.
Adjust the seat ( Y page 92) and head
restraint ( Y page 92).
On the driver's side, adjust the steering
wheel ( Y page 97) and the exterior mirrors
( Y page 99).
Press the M memory button.
Press one of memory buttons 1, 2 or 3
within three seconds.
The settings are stored in the selected stor-
age position.
If you want to move the seat from the fully
reclined position to a stored seat position,
first raise the backrest using the seat
switch. The seat could otherwise be dam-
aged.
Press and hold the relevant memory button
1, 2 or 3, until the seat, head restraints,
steering wheel and mirrors are in the stored
position.
The setting procedure is interrupted as
soon as you release the memory button.