600 Hours (Semiannual) Checks And Maintenance; Every 500; Every 1000 Hours (Yearly) Checksand Maintenance; Every 1500 Hours (Overhauls) - Robin America DY30 Service Manual

Robin industrial engine service manual
Hide thumbs Also See for DY30:
Table of Contents

Advertisement

11-5 EVERY 500
-
600 HOURS (SEMIANNUAL) CHECKS and MAINTENANCE
Checks and maintenance
Reasons for requiring them
Remove cylinder head and remove carbon deposit.
Check
valve seats both intake and exhaust and
The engine will be out of order.
Replace fuel fdter.
The engine will be out
of
order.
The engine will be out
of
order.
grind, if necessary.
~~
11-6 EVERY 1000 HOURS (YEARLY) CHECKSand MAINTENANCE
I
Checks and maintenance Reasons for requiring them
~
Change piston
rings.
To prevent from danger caused by the fuel leakage.
Replace fuel pipe once a year.
The engine output drops and become out
of
order.
11-7 EVERY 1500 HOURS (OVERHAULS)
I
Checks
and
maintenance
Reasons for requiring them
I
Performoverhauls, clean, correct
or replace parts.
I
The engine output drops and become out of order.
I
11-8 PREPARATION for LONG ABEYANCE
1) Perform the above 1 1
-
1
and 1 1-2 maintenance job.
2) Drain fuel from the fuel tank.
3) To prevent rust in the cylinder bore, apply oil through the breather hole on the surface
of rocker cover and made
cranking for 2
-
3 times and then fit the rocker cover. Don't apply too much oil as the excess oil will be collected in
the combustion chamber
of
the piston.
4)
Turn cranking handle and leave it where the restance is the heaviest.
5 ) Clean the engine outside with oiled cloth. Put a vinyl or other cover over the engine and store the engine in dry place.
- 4 6
-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dy41Dy35

Table of Contents