Electric Apparatus - Robin America DY30 Service Manual

7-6
ELECTRIC APPARATUS (Electric Starter)
1. Wiring diagram
KEY SWITCH
GENERATOR
ELECTRIC STARTE
1) Circulation
12V35AH
When starting by the electric starter, (Key is at the position of start.)
Battery (+)
-+
BAT of key
+
ST of key
+
Starter
+
Battery (-) (earth)
Charging, operating (Key is at the position of operation.)
Generator
"f
Rectifier
+
IC of
key
+ .
BAT of key
+ .
Battery (+)
2. Lead wire
for
electric starter
When mounting the engine, location of the battery may comes into question, but set the lead wire following method:
BATTERY StDE TERMINAL ELECTRIC STARTER SIDE T E R M I N A L
JIS BA-508 JIS BA-508
3 . Earth band
Plain woven lead wire sectional
area
20 mm2 and up.
I "
L
Approx. 25
Fasten tightly to the place made of metal and not paint coated. The place must be electrically conducted completely to the
crankcase of the engine.
4, Other remarks
1) All lead wires are classified by coloring, so when connecting, select and connect by color.
Meantime, insert the connectors each other up till the roots.
2) The wire from (+) terminal of the battery must be connected t o (+) terminal of the electric starter, and the wire from
the (-) terminal must be connected to the earth of the engme body.
3)
Select the wire from the below Table A, based on the required length of the wire.
4) When the key switch is set apart from the engine body, select the wire from below Table B, based on the required
length of the wire between the key switch and the magnetic switch on the side of engine.
I
Length
Outside dia.
Description Length.
Outside dia.
Description
1.5 m or shorter
1.4 mm A V 3
3 m " 5 m 10.8 mm AV30 2.5
m
-
3 m
1.9 mm A V 2
'i.5m-31-17
8.5 mm AV20 1.5 m
-
2.5 m
1.5 mm A V 1 -25 1.5
m or shorter
7.3 mm
AV15
Table A Table B
-39
-
I -
, " -