Using The Tool - Stanley Dubuis BCP065C Instruction Manual

USING THE TOOL

Slide the battery all the way into the
tool until lock clicks.
Push on the trigger to move forward the blades to the cable. Check that the cable is in the correct
cutting position, and then push on the trigger, so the blades move regularly till the complete cutting of
cable.
An audible "click" advise the release of the safety valve, at the maximum pressure force, securing the
tool from over-compression due to a too high cutting effort.
CAUTION: PLEASE, DO NOT PUT YOUR FINGERS BETWEEN BLADES. RISK OF
GRAVE CUTS.
PERFORM OTHER CUTTINGS IN THE SAME WAY.
0915 - BCP065C - 15
Slide the cable through the tool head.
DO NOT USE THIS TOOL ON LIVE CABLES
Press the release trigger to retract the piston.
Press the button ON/OFF tool. The LED light up
(see LED INDICATIONS).
English