Safety Instructions - Stanley Dubuis BCP065C Instruction Manual

SAFETY INSTRUCTIONS

HYDRAULIC CUTTING TOOL:
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO READ CAREFULLY THE
DIRECTIONS FOR USE AND TO FOLLOW THE INSTRUCTIONS IT CONTAINS.
IF YOU DO NOT RESPECT THE INFORMATION WRITTEN IN THAT INSTRUCTION MANUAL THE
WARRANTY WILL BE CANCELLED.
This tool satisfies with European safety standards.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection
system for used electronic products in accordance with legislation that requires proper treatment, recover and
recycling.
Please, do not put your fingers between blades. Risk of grave cuts.
Handle the locking spindle with precaution to avoid being pinched.
CHECK THAT THE LOCK IS CLOSED CORRECTLY BEFORE CUTTING.
ADVICE:
It is recommended to keep the tool away from dusty or rough places, in order to avoid wrong working.
Although this tool is robust, it must be handled with care.
After use, wipe the tool carefully and replace it in its case.
In case of long storage, spray the blades of the tool. We advise to use Wynn's H60 spray. Keep the tool inside, in a ventilated
warehouse. Avoid fast temperature changes, this can produce condensation.
CHARGER:
See battery charger instruction manual.
BATTERY:
See battery charger instruction manual.
0915 - BCP065C - 13
DO NOT USE THIS TOOL ON LIVE CABLES
English