Using The Tool - Stanley DUBUIS BCE025G Instruction Manual

USING THE TOOL

Slide the cable through the tool head, or open
the head by unfastening the lock.
CHECK THAT THE LOCK IS CLOSED COR-
RECTLY BEFORE CUTTING.
Push on the trigger to move forward the blade to the cable. Check that the cable is in the correct cutting position, and
then push on the trigger, so the blade moves regularly till the complete cutting of cable.
Continue to press the trigger up to automatic return of the blade. Release the trigger. The motor stops.
An audible "click" advises the release of the safety valve, at the maximum pressure force, securing the tool from over-
compression due to a too high cutting effort.
CAUTION: PLEASE, DO NOT PUT YOUR FINGERS BETWEEN BLADES. RISK OF GRAVE CUTS.
PERFORM OTHER CUTTINGS IN THE SAME WAY.
0715 - BCE025G - 15 KW Hydraulik GmbH – 96515 Sonneberg – Germany – www.kw-hydraulik.de
All manuals and user guides at all-guides.com
Release the trigger. The motor stops. Press the manual release trigger.
DO NOT USE THIS TOOL ON LIVE CABLES
If necessary, press the emergency release
trigger.
Slide the battery all the way into the
tool until lock clicks.
or
English