The Monitor Section - HP 9000 300 Series Installation Reference

Connect power to the computer.
Locate the power switch and press it in and out a few times to get the feel of it. Now
set it to the off position (that is, the switch is "out").
Connect the power cord to the Computer's power socket. Then connect the other end to
the wall socket.
If a replacement power cord is needed, make sure you order an HP
power cord that is identical to the original. Otherwise, electrical
shock or equipment damage may result.
The Monitor Section
This section covers installing your video display monitor and connecting it to the
computer mainframe. The monitors are not similar enough to cover together, so they
are separated by resolution and whether monochrome or color, and covered individually.
Medium-resolution Monochrome
This section covers installing a medium-resolution monochrome monitor.
Find and unpack the video board.
If you ordered an unbundled system or are upgrading your system, the video board may
have come separately. Locate the video board carton. It will have the number 9S542A
stamped on it.
Install the video board in the computer.
The video board must be installed in the bottom slot in the computer. If a board is
already located there, it must be removed and positioned elsewhere.
Find the video display monitor carton.
The monitor furnished with your computer is the HP 35731A/B 12-inch Monochrome
Video Monitor.
Find the carton containing your monitor. It will have HP 35731 printed on it. Go ahead
and unpack the monitor and place it on a convenient surface at your work area.
8 Installing Your System