Suzuki Jimny Manual page 412

SUPPLEMENT
If you must use a front-facing child
restraint in the front passenger's seat, be
sure to move the front passenger's seat as
far back as possible. Please refer to "Seat
belts and child restraint systems" in the
"BEFORE DRIVING" section for details on
securing your child.
Airbag symbol meaning
72M00150
You may find this label on the sun visor.
WARNING
NEVER use a rearward facing child
restraint on a seat protected by an
ACTIVE AIRBAG in front of it, DEATH
or SERIOUS INJURY to the CHILD
can occur.
10-3
Seat belt warning
Follow this warning as well as the instruc-
tion for seat belt in this book.
WARNING
Seat belts are designed to bear upon
the bony structure of the body, and
should be worn low across the front
of the pelvis or the pelvis, chest and
shoulders, as applicable; wearing the
lap section of the belt across the
abdominal area must be avoided.
• Seat belts should be adjusted as
firmly as possible, consistent with
comfort, to provide the protection
for which they have been designed.
A slack belt will greatly reduce the
protection afforded to the wearer.
• Care should be taken to avoid con-
tamination of the webbing with pol-
ishes, oils and chemicals, and
particularly battery acid. Cleaning
may safely be carried out using
mild soap and water. The belt
should be replaced if webbing
becomes frayed, contaminated or
damaged.
(Continued)
WARNING
(Continued)
• It is essential to replace the entire
assembly after it has been worn in
a severe impact even if damage to
the assembly is not obvious.
• Belts should not be worn with
straps twisted.
• Each belt assembly must only be
used by one occupant; it is danger-
ous to put a belt around a child
being carried on the occupant's
lap.
In the case where a "Seat Belt Assembly"
incorporates an "Automatic Length Adjust-
ing and Locking Retractor" or an "Emer-
gency Locking Retractor".
WARNING
• No modifications or additions
should be made by the user which
will either prevent the seat belt
adjusting devices from operating to
remove slack, or prevent the seat
belt assembly from being adjusted
to remove slack.
• Referring to the SEAT BELT
instruction in this book, adjust the
seat belt so that the lap and sash
portions of the Seat Belt Assembly
fit as firmly as possible consistent
with comfort.
78RB1-01E