Suzuki Jimny Manual page 121

Engine coolant temperature light
When the ignition switch is turned "ON",
this light comes on briefly so you can
check that the light is working.
This indicator has the following two func-
tions.
Low engine coolant temperature light
(blue color)
This light stays on while the engine is still
cold and goes off when the engine has
warmed up.
If this light blinks, there is a problem with
the system. Have your vehicle inspected
by a SUZUKI dealer.
High engine coolant temperature warn-
ing light (red color)
If this light blinks while driving, it means the
engine is running hot. Avoid driving condi-
tions that may lead to actual overheating. If
the light stays on without blinking, then the
engine is overheating. Follow the instruc-
tions in "Engine trouble: Overheating" of
"EMERGENCY SERVICE" section.
54G344
NOTICE
Continuing to drive the vehicle when
engine overheating is indicated can
result in severe engine damage.
BEFORE DRIVING
Dual sensor brake support indica-
tor light (if equipped)
54P000255
When the ignition switch is turned "ON",
this light comes on briefly so you can
check that the light is working.
When the automatic brake system is acti-
vated, this light blinks rapidly.
In the following situations, this light will come
on and the dual sensor brake support will
stop functioning when the ignition switch is
"ON".
When the dual sensor is faulty, the function
of the dual sensor stops until the ignition
switch is turned to LOCK position. Find a
safe place to park and turn the ignition
switch to "LOCK" position. Restart the
engine, and check that the dual sensor
brake support indicator light, lane depar-
ture warning indicator light and high beam
assist warning light go off.
78RB1-01E
2-48