Suzuki Jimny Manual page 105

NOTE:
• If you refuel when the ignition switch is
"ON", the driving range may not indicate
the correct value.
• When you reconnect the terminals to the
lead-acid battery, the value of driving
range will be shown after driving for a
period of time.
Average speed
If you selected average speed the last time
you drove the vehicle, the display indicates
the last value of average speed from previ-
ous driving when the ignition switch is
turned "ON". Unless you reset the value of
average speed, the display indicates the
value of average speed which includes
average speed during previous driving.
To reset the value of average speed, push
and hold the indicator selector knob (3) for
a while when the display indicates an aver-
age speed. The display shows "---" and
then indicates a new average speed after
driving for a short time.
NOTE:
When you reconnect the terminals to the
lead-acid battery, the value of average
speed will be shown after driving for a
period of time.
Driving time
The display shows the total amount of driv-
ing time since the indication was reset.
• To reset the driving time, push and hold
the indicator selector knob (3) for a while
when the display shows the driving time.
NOTE:
• When you reset the indication or recon-
nect the terminals to the lead-acid bat-
tery, the driving time will be shown after
driving for a while.
• The indicated maximum value of driving
time is 99:59:59. No more than the maxi-
mum value will be indicated on the dis-
play until you reset the driving time.
Gearshift indicator
The display (D) shows the gearshift indica-
tor.
Refer to "Gearshift indicator" in "OPERAT-
ING YOUR VEHICLE" section.
BEFORE DRIVING
Trip meter
The display (E) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter, push and hold the
trip meter selector knob (2) for a while.
NOTE:
The indicated maximum value of the trip
meter is 9999.9. When you run past the
maximum value, the indicated value will
return to 0.0.
Odometer
The display (F) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
78RB1-01E
2-32