Page 1
F1 Flexible Array Loudspeaker System F1 Model 812 Passive Loudspeaker Installation and Safety Guidelines Instrucciones de Instalacion y de Seguridad Installation et Instructions de Sécurité Installations- und Sicherheitshinweise...
Page 2
• Do not use the F1 Model 812 Passive speaker with a tripod/stand that is unstable. The speaker is only designed for use on a 35 mm post, and the tripod/stand must be capable of supporting a speaker with a minimum weight of 47 lbs (21.4 kg) and an overall size of...
Page 3
Lautsprecher über Kopf installieren. • Verwenden Sie den F1 Model 812 Passive Lautsprecher nicht mit einem instabilen Stativ. Der Lautsprecher ist nur für die Verwendung mit einem 35-mm-Sockel ausgelegt, und das Stativ muss einen Lautsprecher mit einem Mindestgewicht von 21,4 kg und einer Gesamtgröße von 665 mm H x 334 mm B x 375 mm T) tragen können.
Product Overview The Bose® F1 Model 812 Passive Flexible Array loudspeaker is a small-format, full range sound reinforcement loudspeaker with FLEX array technology, featuring four field-selectable sound coverage patterns: Straight, C, J, and Reverse-J. The flexible array shape is easily snapped into place on site, allowing installers to direct sound energy to listeners and away from wall and ceiling surfaces.
Introduction pro.Bose.com Using the Flexible Array Shape the coverage pattern by moving the position of the top and bottom array. Pushing the array in Pulling the array out Loudspeaker Dimensions 6 English Installation Guide...
U-Bracket Mounting Kit The U-Bracket Mounting Kit available from Bose allows for ±115 degrees of rotation to adjust the coverage angle for wall and ceiling-mounted installations. When the F1 Model 812 Passive loudspeaker is mounted horizontally, use the flexible array to adjust the horizontal coverage pattern for each loudspeaker by up to 40 degrees, and the U-bracket to adjust the vertical mounting angle and direct the loudspeaker’s 100 degrees...
Installation pro.Bose.com U-Bracket Coverage Patterns Side View ±115° mounting angle adjustment, directed 100° vertical coverage Top View: Reverse-J, C, and J Patterns Asymmetrical array configuration to reduce side wall reflections and improve clarity Top View: C Patterns Directed 100° vertical coverage and symmetrical horizontal coverage...
Yoke Mounting Kit The Yoke Mounting Kit available from Bose allows for adjustment of the pitch (up/down angle) and yaw (right/left angle) of the loudspeaker in ceiling-mounted installations. Use the flexible array to futher refine the vertical coverage pattern by up to 40 degrees. The yoke mounting bracket is suitable for standard and high ceiling installations.
The Pan-and-Tilt Bracket available from Bose allows both pan/yaw (right/left angle) and tilt/pitch (up/down angle) adjustment for the wall-mounted F1 Model 812 Passive loudspeaker. Use the flexible array to further refine the vertical coverage pattern by up to 40 degrees.
WARNING: The F1 Subwoofer speaker stand is not compatible with the F1 Model 812 Passive loudspeaker. The bottom of the F1 Model 812 Passive is designed to be used only with a standard 35 mm pole mount. WARNING: Do not use the F1 Model 812 Passive loudspeaker with a tripod stand that is unstable. The loudspeaker is only designed for use on a 35 mm pole, and the tripod stand must be capable of supporting a loudspeaker with a minimum weight of 21.31 kg (47 lb) and an overall size of 665 mm H x 334 mm W x 375...
Installation pro.Bose.com Tripod Stand Coverage Patterns Side View: Straight Pattern Side View: Reverse-J Pattern Side View: J Pattern Side View: C Pattern Installation Guide English 13...
The Bose® PowerMatch configurable power amplifiers offer optimal amplification, amplifier limiting, digital signal processing (DSP), and DSP presets for use with the F1 Model 812 Passive Flexible Array loudspeaker. Please refer to the specifications listed on the pro.bose.com website for amplifiers and compare with the table above to determine which model is best for your particular system design.
1.414 Recommended Subwoofers The F1 Model 812 Passive loudspeaker can be used without a subwoofer. However, it can also be used with a subwoofer, in which case Bose recommends the MB12 passive subwoofer for indoor installed applications. The F1 Subwoofer can be used with the F1 Model 812 Passive loudspeaker. However, the F1 Subwoofer is an active subwoofer and may not be suitable in system setups that include the F1 Model 812 Passive loudspeaker.
21.3 kg (47 lbs) Environmental Rating Indoor Technical specifications subject to change. See pro.Bose.com for the latest technical data sheet and for more information. Limited Warranty Your product is covered by a limited warranty, Visit pro.Bose.com for warranty details. The warranty information provided with this product does not apply in Australian and New Zealand. See our website at www.bose.com/au/warranty or www.bose.com/nz/warranty for details of the Australian and New...
Taiwan Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan Mexico Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. Installation Guide English 17...
Page 18
Additional Information pro.Bose.com 18 English Installation Guide...
Page 19
Additional Information pro.Bose.com Installation Guide English 19...