Getting Started; Before Installation; Tools Required; Parts Provided - Jenn-Air JUIFX15HX Installation Manual

GETTING STARTED

BEFORE INSTALLATION

Gather the required tools and parts before
starting installation. Read and follow the
instructions provided with any tools listed.
IMPORTANT: These instructions are intended
as a general guide only and do not supersede
any national or local codes in any way.
Compliance with all local, state, or national
codes pertaining to this type of installation
should be determined prior to installation.
Installer: Please be sure to leave Installation
Instructions with the homeowner.
Homeowner: Keep the Installation Instructions
for future reference.
Torx, T20 and T25 are trademarks of Acument Intellectual Properties, LLC.
†

TOOLS REQUIRED

Gather the required tools before starting
installation.
TOOLS REQUIRED
Drill and drill bits
Phillips screwdriver
Pencil
Masking tape
Two adjustable wrenches
Level
Wood screws
2" Hole saw or 2" Forstner bit
3/16" hex driver
1/4" nut driver
Pliers
Right angle drivers
TORX T20, T25 screwdriver
†
Tape measure

PARTS PROVIDED

Cabinet brackets
Drain hose and clamp (in hose bag) - on
some models only
#8 x 1/2" pan head wood screws (14)
Double sided adhesive tape
(for custom door panel)
Auxiliary grill kit
GETTING STARTED | 5