Siemens SIMATIC PCS 7 Programming And Operating Manual page 54

Operating and monitoring SFCs
6.15 PCS 7 SFC MultiChart Control
Columns
Sequencer
SF
Step
Comment
Runtime
Transition
CPU
IE
OE
*)
**)
54
Content
Name of the current sequencer.
The icon of the operating state (of the
sequencer) is indicated in front of the
name of the active sequencer. You can
find additional information about this in
the section: Icons for Operating States
(Page 95).
"Step error" display
Name of the first active step
Icon for the step status:
INACTIVE not executed
INACTIVE, running
ACTIVE
HELD
ERROR
Comment of the first *) active step
Runtime of the first *) active step
Name of the first **) active transition
Symbolic display of the result (colored
line)
SFC- Status in the CPU after CPU
Stop/Run
SFC/CPU stop
SFC start with consistent data
SFC start with inconsistent data
Display for an interconnection error
(if error exists, otherwise empty box)
Display for operating error
(if error exists, otherwise empty box)
Several steps can be active at the same time in a simultaneous sequencer.
Several transitions can be active at the same time in an alternative sequencer.
Programming and Operating Manual, 05/2017, A5E41356392-AA
Function
Display
Display
Display
Clicking this name opens the
detail view of the SFC with
the active step centered.
Display
Display
Display
Clicking this name opens the
detail view of the SFC with
the active transition centered.
Display
Display
Display
SFC Visualization (V9.0)