Siemens SIMATIC PCS 7 Programming And Operating Manual page 33

Note
● When you open the faceplate, the "Prepared Values" view (Idle or MANUAL mode) or the
"Actual Values" view (in all other operating states) is displayed depending on the current
operating state of the SFC.
● When a faceplate is open, a change in the operating state does not automatically change
the view.
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA
6.2 Operating and monitoring the SFC by means of faceplate
Operating and monitoring SFCs
33