The Eastwood MIG Stud Welding Kit transforms your MIG welder into a Stud Welder which can be SET UP used to repair and remove dents from sheet metal. To utilize your Eastwood MIG Stud Welder Kit, you will need a MIG welder with a minimum of 100 Amp output that utilizes a Tweco style nozzle WARNINGS NOTE: This was designed for Tweco Style torches but may work on other styles.
Page 3
OPERATION Adjust 2mm set screw There are multiple adjustments that need to be made to optimize the Eastwood MIG Stud Nozzle so it contacts pin before it will operate properly: • Depth of MIG Gas Nozzle into the Stud Nozzle •...
7. Pull back on the slide of the hammer with a quick motion to pull the metal back. It may help to For accessories and replacement parts, visit Eastwood.com >> KEYWORD: 13928 tap the metal around the pin with a body hammer to relax it and allow for the metal to move easier.