Relocation And Disposal - Hitachi NEXT Series Instruction Manual

12. RELOCATION AND DISPOSAL

12.1 Relocation
To relocate the product, please contact the local HITACHI distributor/master dealer or representative office. Note in
particular that you need to replace the parts to relocate the compressor from a 50 Hz area to a 60 Hz area, or vice versa.
Otherwise, the air compressor cannot be operated at the relocation site. Operating the compressor without parts
replacement may cause failure of the compressor.
12.2 Disposal
To dispose of the air compressor after long use, be sure to drain lubricating oil. It is dangerous if lubricating oil leaks
to the outside for some reasons from a disposed air compressor. Contact the local HITACHI distributor/master dealer
or representative office.
119