Sanyo SCP-2500 User Manual page 37

Hide thumbs Also See for SCP-2500:
Table of Contents

Advertisement

Using Voice Prompt
This feature allows you to hear voice prompts when using
Voice-activated dialling, Voice Memo, Screen Call setting, etc.
(Default Setting is Off.)
1. Select
2. Select On.
Tip:
When ringer volume is set to
prompts cannot be heard.
Setting Up Key Press Echo
With this feature, you can hear a voice say the numbers when
you press the keypad. This feature is available when you are in
standby mode.
1. Select
2. Select On or Off.
Note:
If the Key Beep is off, you are not able to change this setting. See
"Adjusting the Application, Start-up/Power-off, or Key Beep Volume" on
page 30.
Alert Notification
Your phone comes with several different options to keep you
aware of what's going on by sounding the alert or ringer.
To set the alerts:
1. Select
2. Select an option and press
Service to set alert on or off for network services
parameter changes.
Voicemail to set an alert to notify you of voice message(s).
Select Ringer Length to set the ringer length of Voicemail
notification.
Messaging to set an alert to notify you of text or picture
message. Select Ringer Length to set the ringer length of
Messaging notification.
Minute Beep to set a minute reminder that beeps ten
seconds before the end of each minute during a call.
> Settings > Sounds > Others > Voice Prompt.
> Settings > Sounds > Others > Key Press Echo.
> Settings > Sounds > Alerts.
Silence All or Vibrate All
.
4. Your Phone's Settings
, voice
31

Advertisement

Table of Contents
loading

Table of Contents