Using The Battery - Sanyo SCP-2500 User Manual

Hide thumbs Also See for SCP-2500:
Table of Contents

Advertisement

Using the Battery

Installing the Battery
1. Insert the battery into the opening on the back of the phone
and gently press down.
2. Place the battery cover into the position as indicated in the
diagram, and slide it until you hear it snap into place. Then,
slide the battery release latch.
2
Removing the Battery
Warning!
Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
1. Make sure the power is off so that you don't lose any stored
numbers or messages. Slide the battery release latch, and then
slide the battery cover and remove it.
2. Use your thumbnail to lift and then remove the battery as
indicated in the diagram.
1
Charging the Battery
Your phone comes with a rechargeable battery. You should
charge the battery as soon as possible so you can begin using
your phone.
Keeping track of your battery's charge is important. If your
battery level becomes too low, your phone automatically turns
off and you will lose all the information you were just working
on. For a quick check of your phone's battery level, glance at the
12
2. The Basics
1
2
3
3

Advertisement

Table of Contents
loading

Table of Contents