COMMAND CODE TITLE:
EA
FUNCTION:
This command is used for fault maintenance of the PBX. The functions of this command are outlined
below:
• Storing fault information into the Fault Store Memory upon occurrence of a fault.
• Display of the stored fault information
• Control of the external alarm upon occurrence of a fault
PRECAUTION:
(1)
In CMEA Y=0, the fault information is automatically displayed when
first data 00.
(2)
See Fault Information Display in the following pages for details on how to read the fault
information.
(3)
When entering data with characters, the following characters can be registered;
Alphabet upper case (A-Z), alphabet lower case (a-z), numeric (0-9), symbol (! " # $ % & ' ( ) + ,
; < = > ? @ [ ] ^ _ ' { } ~), Space, hyphen (-), period (.), slash (/), colon (:)
NOTE:
The character "CCC" cannot be registered.
ASSIGNMENT PROCEDURE:
ST + EAY
+ DE
DATA TABLE:
Y
No.
MEANING
0
Fault information
display
(Display only)
Page 3-677
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
1ST DATA
+
(1-3 digits) +
DE
+
1ST DATA
DATA
MEANING
0
The newest fault information
(0-9) stored in Fault Information
9
Memory
F
Fault information all clear
2ND DATA
+
EXE
(1-8 digits)
2ND DATA
DATA
–
NOTE 1
NOTE 4
3-663
is pressed after entering
DE
RELATED
COMMAND
MEANING
–
Continued on next page
NWA-033623-001 Rev.8.1
NOVEMBER/12/2008
CMEA
91ch3008.fm