NEC UNIVERGE SV8300 Command Manual page 49

CONDITION
Commands which can be
used only under Off-Line
mode of the CPU blade. See
"METHOD OF SETTING
ON-LINE/OFF-LINE
Page 2-6
MODE".
NOTE
OFF LINE
Commands which require a
reset of the IPT (P2P CCIS)
after data setting.
• Executed by CME0
Y=5>01
IPT (P2P CCIS) RESET
NOTE: Before the CPU blade is placed into Off-Line mode, the system data backup must be executed
by CMEC Y=6>0: 0.
Conditions for Using Commands
COMMANDS
CM00
CM01
CM0B Y=000
CM4A Y=90
CMEC Y=7
CM0B Y=1XX>34, 35
CM10 Y=02
CM30 Y=00
CMA7 Y=44, 46, 50
2-5
Chapter 2 PRECAUTION
CONDITIONS FOR USING COMMANDS
MEANINGS
System Data Memory All Clear/SRAM Clear
System Data Memory Partial Clear
LAN Data Assignment
Day/Night Mode Change by System Clock,
Automatic RC/DND Mode Select by System
Clock
Maintenance by PCPro/CAT
LAN Data Assignment
Station Number, Trunk Number, Blade Num-
ber
Trunk Data
CCIS Channel/IP Trunk/SIP Trunk Data 1
NWA-033623-001 Rev.8.1
91ch2001.fm
JUNE/15/2011