NEC UNIVERGE SV8300 Command Manual page 331

COMMAND CODE TITLE:
31
Y
DATA
A 32 Tone Duration (Off time) of MFC (Forward
Signal/Backward Signal)
[8300R3.5]
NOTE:
33 Forward signal receiver start delay time
[8300R3.5]
NOTE:
34 Forward signal receiver detect Level
[8300R3.5]
NOTE:
MFC/MF-ANI TRUNK DATA
1ST DATA
MEANING
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
DATA
01 20 ms.
98 1960 ms.
99 5100 ms.
NONE 100 ms.
00 0 ms.
98 24.5 ms.
99 64 ms.
NONE 0 ms.
00 Detect Level 0: 0 to -25 dBm
01 Detect Level 1: -5 to -30 dBm
02 Detect Level 2: -10 to -35 dBm
03 Detect Level 3: -15 to -40 dBm
04 Detect Level 4: -20 to -45 dBm
05 Detect Level 5: -25 to -50 dBm
06 Detect Level 6: -30 to -55 dBm
NONE Detect Level 0: 0 to -25 dBm
3-275
: Default
2ND DATA
MEANING
Increment unit: 20 ms.
Increment unit: 0.25 ms.
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/14/2011
CM31
91ch3003.fm