Roland Sign Maker CAMM-1 PNC-1050 User Manual page 3

Thanks and Best Wishes
Thanks you very much for purchasing the < CAMM-1 > PNC-1050.
Since we wish you many years of productive use of your PNC-1050, we ask you to read this manual and make
yourself familiar with the PNC-1050's operational procedures and requirements before running it.
If you find some abnormality immediately turn OFF the power switch and check the user's manual to find out what is
wrong.
Introduction
The manual is divided into four chapters and an appendix. When operating the PNC-1050, please refer to
one of the following chapters for information related to your application at the time:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Appendices
In Chapter 1, you will find all the basic information necessary for setting up and operating the PNC-
1050 in a safe and efficient manner. Items outlined in this chapter include names of unit parts, items
provided as accessory as well as precautions to ensure your safety and avoid damage to the unit.
Chapter 2 helps you to understand the operational procedures you should follow for proper cutting sheet
processing. Detailing the many ways in which the PNC-1050 can be used to cut sheets are offered in
this chapter.
Chapter 3 briefly covers the various settings that can be made using the display menus. It describes the
functions and the procedures used to make menu settings.
Chapter 4 covers the instruction set built into the PNC-1050, and the device control instructions. This
chapter gives brief information on CAMM-GL III and device control instructions for those who wish to
program the computer themselves. Those who plan to use commercially available software to output
data to the PNC-1050 may skip this chapter. A " CAMM-GL III Programmer's Manual " is available for
separate purchase for those wishing to create their own programs for the CAMM-1 . For further infor-
mation, please contact the nearest Roland Digital Group dealer or distributor.
Finally, the appendix area provides you with a table displaying items optionally available for use with
your PNC-1050, a index to ease your use of this manual.
Copyright © 1993 ROLAND DG CORPORATION.
Basic Knowledge of the PNC-1050
Cutting Operational Procedures
Explanation of Display Menu
Technical Guide
1