Table of Contents
Advertisement
Reset the interface settings so that those of the computer and the PNC-1050 match.
• Under serial interface, communication parameter settings do not match.
Reset the serial interface communication parameter settings to match those of the computer or set the unit to
[AUTO].
• Problems with the connected computer's software or hardware.
Investigate and correct computer or software oriented symppoms.
• Computer (software) settings are incorrect.
Refer to the software operation manual and correct accordingly.
• Is the sheet guide lowered ?
Lower the sheet guide.
Sheets are not properly cut.
• Blade holder is not firmly attached to tool carriage.
Install the blade holder securely.
• Blade is chipped.
Replace with a new blade.
18
Hide quick links:
Advertisement
Table of Contents
