Spare Parts - Stiga 121 M User Manual

Always check the blades after a collision. If the
blade system has been damaged, defective parts
should be replaced.
Always use original spare parts. Non-
original spare parts can entail a risk of
injury, even if they fit the machine.
The cutting system comprises three blade
bars with two replaceable blades Y (fig. 15). When
replacing blades, both should be replaced to avoid
imbalance.
Install the new blades. Tighten screws V and W
properly. Tightening torque: V - 9.8 Nm, W - 24
Nm.
In the event of a powerful collision, the blades may
be bent out. Undo the locking nut X and fold back
the blade. Install a new original break bolt V.
Tighten the locking nuts X and Z.

SPARE PARTS

STIGA original spare parts and accessories are
designed specifically for STIGA machines. Please
note that 'non-original' spare parts and accessories
have not been checked or approved by STIGA:
The use of such parts and accessories
can affect the function and safety of the
machine. STIGA accepts no
responsibility for damage or injuries
caused by such products.
STIGA reserves the right to make alterations to the
product without prior notification.
ENGLISH
GB
7