Selecting A Dab + Station; Storing Stations In The Station Memory - JVC RV-NB200BT Operating Instructions Manual

Manual tuning of ensembles
• Press the "MENU" button on the device to enter the DAB menu.
• Press the button until "Manual tune" appears in the Display.
• Pressing the uII button confirms the function and the currently set channel with the corresponding
frequency is shown in the display.
• Press the button to manually select another channel.
• Press uII to confirm the selection. After that, the signal level is shown in the display, another press
loads the current ensemble.

Selecting a DAB + station

The stations stored alphabetically in the station list can be called up as follows:
• Press the or
TUN+
station list.
• When the desired station is selected, press the uII button on the remote control to start playback.
The Display will show"Playing".
• If the reception level on the selected station is insufficient for trouble-free playback, "Service not
available" appears in the display. In this case please select another station.

Storing stations in the station memory

To store DAB stations for easier retrieval, 30 memory slots are available. To assign the memory, please
proceed as follows:
• Select a station to save
• Press the button until the "Preset Store" and a memory location is showed on the Display.
PRG
An empty memory location is displayed with"Empty", an assigned memory space with the name of
the sender. You can also reassign an already assigned memory.
• Use the or buttons to select a memory location.
• Briefly press the uII button to save the station. The display briefly shows "Preset X Stored".
• The stations can now be selected using the
button on the remote control to scroll backwards or forwards in the
TUN-
or button on the device.
17