Page 4
E.g. “See 2.3.2”. ENGLISH 2 DESCRIPTION 2.1 General The cutting deck is intended for use on Stiga’s 2- wheel drive Park machines. The cutting deck is supplied in one of the follow- ing versions: • With manual adjustment of cutting height.
3.2 Belt The cutting deck’s rear section should rest on the floor (it should not be lifted or secured). Install the belt as follows: 1. Set the maximum cutting height. 2. Locate the belt around the machine’s belt pulley (8:B). 3.
These can be replaced if necessary. ENGLISH 6 SPARE PARTS STIGA genuine spare parts and accessories are de- signed specifically for STIGA machines. Please note that ‘non-genuine’ spare parts and accessories have not been checked or approved by STIGA:...
Page 7
w w w. s t i g a . c o m GGP Sweden AB · Box 1006 · SE-573 28 T RANÅ S...