Installing battery
1
Insert the battery into the slot on the computer.
2
Connect the battery cable to the connector on the system board.
3
Replace the M 2 x 4L screws to secure the battery to the computer.
4
Install the:
a
base cover
b
SIM card
c
Micro SD card
NOTE:
To install both cards if equipped .
5
Follow the procedure in
PCIe Solid State Drive (SSD)
Removing the NVMe SSD card
1
Follow the procedure in
2
Remove:
a
MicroSD card
b
SIM card
NOTE:
To remove both cards if equipped and no need to remove the blank filler.
c
base cover
d
battery
NOTE:
Disconnect the battery cable from the system board and remove the battery.
After working inside your
computer.
Before working inside your
computer.
Extracción e instalación de componentes
13