NOTE:
To remove both cards if equipped and no need to remove the blank filler.
c
base cover
d
battery
3
To remove the LED board:
a
Disconnect the LED board cable from the LED board [1].
b Remove the tape that secures the LED board to the touchpad panel [2].
c
Remove the M2 x 3 screws that secure the LED board [3].
d Lift the LED board from the computer [4].
Installing the LED board
1
Install the LED board into the slot.
2
Replace the M2 x 3 screws to secure the LED board.
3
Affix the tape to secure the LED board.
4
Connect the LED board cable to the LED board.
5
Install the:
a
battery
b
base cover
c
SIM card
d
MicroSD card
NOTE:
To install both cards if equipped.
6
Follow the procedure in
Compartimento para tarjetas inteligentes
After working inside your
computer.
Extracción e instalación de componentes
21