Omron E5AX-LA Manual page 2

E5AX-LA/-MA
Specifications
Digital Controller Ratings
Supply voltage
Operating voltage range
Power consumption
Input
Input impedance
Control output
Control mode
Alarm output
Setting method
Indication method
Shift set input
Other functions
Note: The control output is optically insulated from the internal circuits.
Control Output Unit Ratings
Relay Output Unit
SSR Output Unit
Voltage Output Unit
(for driving SSR)
Current Output Unit
2
100 to 240 VAC, 50/60 Hz (either frequency applicable with same unit)
85% to 110% of rated supply voltage
Approx. 10 VA (at 100 VAC) to 15 VA (at 240 VAC)
Approx. 12 VA (at 100 VAC) to 15 VA (at 240 VAC) with communication function
E5AX-LA: 4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 1 V
E5AX-MA: 0 to 100 mV, 0 to 10 mV, –10 to 10 mV
Current input: 150 W
Voltage input: 1 MW min.
See Control Output Unit Ratings.
ON/OFF or PID control with auto-tuning
Relay output, 2 independent SPST-NO contacts; 3 A, 250 VAC
Digital setting via Up and Down Keys
Digital indications (character heights PV: 15 mm and SV: 11 mm) (Color PV: red, SV: green)
No voltage, contact signal input (set value shifted when ON); Contact impedance: 100 W max.
Upper and lower limits for set value
Key protection
Input shift
Manual output (balanceless-bumpless operation switchable)
Normal and reverse output selection
Shift set
Scaling
Watchdog timer function (Detects failures in the CPU and restores the CPU.)
E53-R SPDT; 5 A, 250 VAC (resistive load)
E53-S SPST-NO; 1 A, 75 to 250 VAC (resistive load)
(Leakage current is 1.5 mA max. at 200 VAC)
E53-Q 40 mA, 12 VDC; NPN (with short-circuit protection)
E53-Q3 20 mA, 24 VDC; NPN (with short-circuit protection)
E53-Q4 20 mA, 24 VDC; PNP (with short-circuit protection)
E53-C 4 to 20 mA, DC; Load: 600 W max. resolution: 212
E5AX-LA/-MA