Removing the Carriage Assembly
3.2.3
1. Remove thedocument cover and uppercase. (Refer to Section 3.2.2.)
2. Remove the harness cover.
3. Remove flat cables CN3and CN2 (through ferrite cores)on the B027MAINboard.
4. Remove the CPStite ($P1) (M3 x 6) screw and remove the spring.
5. Remove the pulley holder with timing belt from the center rail.
6. Lift up the carnage assembly.
Figure 3-4. Removing the Carriage Assembly
1 )( M3x6)
Rev. A