3.2.2 Removing the CARRIAGE ASSY.
1. Removing the HOUSING,LOWER. (see Section 3.21)
2. Remove the CABLE,CR attaching to the FRAME COVER of HOUSING,UPPER
3. Remove the 2 CBB (M4 x 12) screws attaching the HOLDEF&UW1' FRONT and REAR of the
CARRIAGE ASSY. to the HOUSING,UPPER
4. Liftoff the CARRIAGE ASSY. with HOLDEW-IAFT FRONT and REAR
Figure 3-3. Removing the CARRIAGE ASSY.
(see fig3-4.)
2. The CABLE,CR must not be gotten tight while CARRIAGE ASSY. moving from front to
rear.
CN4
Figure 3-4. Putting CABLE,CR on the FRAME, COVER
Adhesive Tapes
I
FRAME, COVER
I
3-5