Table of Contents
Advertisement
Quick Start Guide
2
Quick Start Guide
This section guides the user through the EVM test procedure to obtain a valid data capture from the
ADS54J20EVM using the TSW14J56EVM capture card. This should be the starting point for all
evaluations.
2.1
Software Installation
The proper software must be installed before beginning evaluation. See
required software. The
website.
Important: The software must be installed before connecting the ADS54J20EVM and TSW14J56 to the
computer for the first time.
2.1.1
ADS54Jxx EVM GUI Installation
The ADS54Jxx EVM GUI is used to control the ADS54J20EVM. It must be used to properly configure the
devices on the EVM.
1. Download the ADS54Jxx EVM GUI from the TI website. The
contains links to find the software on the TI website.
2. Extract the files from the zip file.
3. Run setup.exe and follow the installation prompts.
2.1.2
High Speed Data Converter Pro GUI Installation
High Speed Data Converter Pro (HSDC Pro) is used to control the TSW14J56EVM and analyze the
captured data. Please see the HSDC Pro user's guide (SLWU087) for more information.
1. Download HSDC Pro from the TI website. The
find the software on the TI website.
2. Extract the files from the zip file.
3. Run setup.exe and follow the installation prompts.
4
ADS54J20EVM
References
section of this document contains links to find the software on the TI
Copyright © 2016, Texas Instruments Incorporated
Section 1.2
References
References
section of this document contains the link to
www.ti.com
for a list of the
section of this document
SLAU687 – May 2016
Submit Documentation Feedback
Advertisement
Table of Contents
