Advertisement
ASSEMBLY
STEP 6
Adjustment
Clamp
• Release the adjustment clamp on the side roof poles and
extend the poles until they reach the vertical poles .
• Insert the pin on the end of each side roof pole into the
corresponding hole in the vertical pole .
STEP 8
Hold Down
Strap
• Buckle the two hold down straps to the front corners of the
Screen Room .
• Stake the straps to the ground .
STEP 10
Awning Velcro
Camper Skirt
Velcro
• Secure the mesh camper skirt to the Screen Room fabric .
Side Roof
Pole
Vertical
Pole
Tent Stake
STEP 7
• Tuck the Screen Room fabric under the side wall hinge
cover on the camper and attach it to the Velcro or
turnbuckles on the ends of the camper .
STEP 9
Camper Skirt
• Secure the mesh camper skirt to the Velcro near the wheel
well of the camper wall .
STEP 11
Top View
• Stake the inside of the Screen Room to the ground through
the loops at the locations shown .
5
Turnbuckle
(Optional)
Camper
Awning
Advertisement
