DAILY MAINTENANCE SCHEDULE
NOTE: If attempting any service repair work disconnect the battery by
depressing the red button on the circuit breaker.
Inspect unit frame for structural damage.
Inspect for corrosion and broken welds.
Inspect wheels and tires. Grease the wheels if
required. Ensure the cotter pins are in place.
Inspect all bolts and fasteners are in place and
secure.
Inspect the strap(s) for damage. Nicks or tears are
not acceptable.
Inspect the push button switches for condition and
operation. Make sure the wiring is secure.
Test the circuit breaker for operation. Cycle the unit
testing for operation, direction and smoothness.
Observe the roller operation in the outer frame
rails. Oil rollers as required. Inspect the drive screw
and ballnut for damage, bending during operation,
and lubrication.
Ensure the operating manual is readily available
for reference.
Keep the battery fully charged.
FOR PARTS AND SERVICE CONTACT:
1-800-697-Mate
8.06
®
PowerMate
Operation Manual
PN 010820 Rev.E
Eng. 05/ 08/ 14