Side Handle Installation - Powermate M-2C Operating Manual

2 1/8 in [54 mm]
3 3/4 in [95 mm]
Outer Frame
SIDE HANDLE INSTALLATION INSTRUCTION
SIDE HANDLE KIT No. 400790
 3/8 in [9.5mm] Drill
Side Handle
Typ.2
A
Rear Face of
Outer Frame
Instruction:
1. Drill a 3/8"diameter hole in the Outer Frame
3 3/4" above the top Strap Bar holes.
2. Insert 5/16"Bolt and Washer into 3/8"hole
from the inside of the Outer Frame. Thread
Side Handle onto Bolt. Align a flat side of
the Side Handle base to the rear face of the
Outer Frame. Tighten Bolt.
Repeat above for other Side Handle.
3.
7.05
®
PowerMate Operation Manual
5/16"Split Lock Washer
Typ.2
5/16-18NC x 3/4"Bolt
Typ.2
DETAIL A
PN 010760 Rev.E
Assembly 400790
Eng. 05/ 08/ 14