Stairclimbing - Powermate M-2C Operating Manual

Upstairs
1
Manoeuver the PowerMate
step as shown in "A", just near enough to allow the
wheels to clear the edge of the treads when raised
as shown in "B".
2
Pivot the PowerMate
as shown in "B". Push the "LOAD DOWN" button to
raise the wheels to rest on step 2.
3
Raise the toe plate off the ground, pivoting on the
wheels of the
PowerMate
button, raising the
PowerMate
resting the frame on step 1 as shown in "C".
4
Pivot the PowerMate
that the wheels are clear of the steps and push
the "LOAD DOWN" button to raise the wheels
to step 3 as shown in "D".
Repeat procedures 3 and 4 until the top of the stairs are
reached.
POWERMATE OPERATION
STAIR CLIMBING
®
backwards to the first
®
on the heel of the toe plate
®
. Push the "LOAD UP"
®
frame and load and
®
on the load frame so
Down Stairs
1. Position the PowerMate
the load frame overhanging and clear of the steps.
Push the "LOAD DOWN" button to lower the load
and load frame, and rest it on step 2 as shown in
"E".
2. Pivot the PowerMate
and push the "LOAD UP" button which will lower
the wheels to step 3 as shown in "F".
3. Pivot the PowerMate
frame clear of the steps and push the "LOAD
DOWN" button to lower the load frame to rest on
the toe plate on step 1.
Repeat procedures 2 and 3 until reaching the
bottom of the stairs.
3.04
®
PowerMate Operation Manual
®
at the top of the stairs with
®
on the heel of the load frame
®
on its wheels to lift the load
PN 010340 Rev.E
Eng. 05/ 08/ 14